Many bobblehead lovers are curious concerning how custom bobble heads is generated and why it usually takes weeks to make one. In a top level, you will find four steps involving in building a custom bobblehead doll: sculpting, molding, polishing, and painting, excluding the two preparation work and final shipping. Just before into specifics of each step, it is worth mentioning that this process described is made for the resin-based bobblehead.
1. Sculpting (Under a day to seven working days)
This step demands a mastery of hand sculpting skills. It will always be carried out by skillful artists, who routinely have several years of experience doing hand sculpting based on provided photos or reference objects. It might take 4 to 5 hours for any very experienced artist to sculpt a 7-inch bobblehead, while for the less experienced artist it may take a lot more than a day or two. After the initial sculpting is finished, the buyer will have the opportunity to analyze its photos. Making changes is pretty simple and quick at this point. However, it will likely be more expensive to request a change with a later stage because the whole sculpture must be rebuilt. Therefore, a consumer should look at the initial sculpture carefully if the bobblehead maker is asking for comments. In case you are not sure, you must ask for more photos or require clarification. By doing that, you could spend more time upfront, but additionally, you will minimize the chance of needing to offer the bobblehead reworked later and getting to pay for more. Also, the client should be aware which a custom bobblehead doll is generated according to submitted photos instead of a live person. Therefore, the expectation needs to be set properly with regards to the resemblance and facial expression in the final bobblehead doll.
2. Molding (7-10 working days)
Molding is the procedure where the initial sculpture from the previous process will be part of a base to construct the profile and curvatures of your bobblehead’s body and head. First, a semi-liquid silicone gel will probably be put on the surface of the initial sculpture. A soft silicone coating that takes the design from the custom sports bobbleheads will probably be formed as soon as the gel dries. Then, a plaster coating is going to be applied at first glance of your silicone coating. The plaster coating will become a hardened cast once the drying process. Subsequently, the first sculpture is going to be removed from the silicone coating. After the preparation job is done, melted resin is going to be injected in the emptied silicone coating to produce the bobblehead. Ever since the silicone coating is soft, the plaster cast wrapping the silicone coat will act to maintain the resin inside the desired shape before it really is solidified. As soon as the resin becomes solid, it will probably be taken out by opening the plaster and peeling off the silicone coating. By now, a raw bobblehead doll has been created.
3. Polishing (a person to three working days)
A raw bobblehead is just not prepared to be painted. It has grease on its surface that needs to be removed, and rough surfaces that must be ground smooth. Neglecting the polishing process can result in poor painting later on. Polishing a bobblehead doll also requires a decent level of craftsmanship. Because its shape and curvature are different in one to another, this method still can not be standardized and automated. Together with eliminating the grease and smoothing the surface, refining the raw bobblehead details manually may be necessary. As a result of tolerances stemming in the molding process, deviation from the initial sculpting is unavoidable. The sculpting artist often needs to fine-tune the raw bobblehead right after the initial polishing, and also this process may need to be reiterated. When it is determined that this defects cannot be fixed, the complete raw bobblehead should be scrapped.
4. Painting (one to three working days)
Painting will not be as simple as it appears to be. Step one is to blend base colors to make colors the consumers desire. The grade of the blended colors is crucial, as it has a large impact on the aesthetic part of the bobblehead. Also, because every bobblehead may have its unique colors, simply making the preferred colors rich in quality for wedding cake toppers can be very time-consuming. Secondly, painting is done utilizing the painting brush manually, because of the b0bbleheads painting areas and complex surface curvatures. Moreover, customers often ask to generate different patterns on his or her clothing. In these cases, the painting artists will be asked to alternate different painting brushes on those tiny areas, which is actually a demanding task. Once paints are used on a bobblehead doll both for its head and the entire body, it could be assembled through a spring with glue for both ends. Obviously, making use of the spring is why the bobblehead doll bobble.
Hopefully, presently, whoever finishes reading these has had an improved understanding of the basic procedure of creating a custom bobblehead doll. With a better comprehension of the process, a consumer can better plan their next purchase of a custom bobblehead doll.